Description
The AirPro Max CPAP Battery Charges 3x Faster Than Other CPAP Batteries
The Max battery pack can recharge from 0 to 100% in just ten hours. Plus, you’ll get a longer lifespan with the max allowing you to charge, deplete, and recharge your max up to 5,000 times-most batteries need to be replaced after 500 charge cycles. Both on the road and during an unexpected power outage, the max rechargeable battery has you covered.
One Battery to Power All of Your Devices
The AirPro max power supply has charging options for almost every device! It features two standard USB ports, a DC charger, and one USB Type-C port. Newer electronic devices may only use the USB Type-C port (found on newer MacBook Pros), while your lightning and micro USB cables will work with the standard USB ports.
Fast-Charging USB Ports for Lightning-Fast Recharging
With over 2 amps of extra power for each USB port, your tablet and mobile devices will charge as much as 300% faster than traditional USB ports! When you connect your device to the max Lithium Ion Battery Bank, you’ll watch your device rocket from zero to a full battery in under two hours – much faster than the traditional market battery’s three-hour recharge time.
Recharge Your Battery Using the Included DC Car Charger
The included car charger allows you to recharge the battery while on the go. It doesn’t connect to your CPAP machine in any way. Plug it into your lighter plug adapter while on the road, and you’ll begin recharging instantly.
Battery Run Times
Run times are calculated assuming no humidity is being used, and no heated tubing is activated.
| Machine | Pressure | Run Time |
| AirMini | 8 | 40 hours |
| AirMini | 12 | 36 hours |
| AirSense 10 | 6-8 | 32 hours |
| AirSense 10 | 10-12 | 28 hours |
| AirSense 10 | 14-16 | 20 hours |
| DreamStation 2 Auto | 6-8 | 36 hours |
| DreamStation 2 Auto | 10-12 | 30 hours |
| DreamStation 2 Auto | 14-16 | 22 hours |
| Z2 Auto | 10 | 24 hours |
- Rated Nights: 3-6
- Capacity: 307.2 Watt Hours/ 25.6 Amp Hours @12 Volts
- Power Ports: 15 Amps Max
- USB Ports: 2 Standard USB Ports, 1 USB Type-C
- Charge Time: 10 from AC included adapter – 6 hours with USB-C PD Charger (60-65 Watt recommended)
- Max Solar Charge – 80 Watts
- Type: Lithium Iron Phosphate
- DC Input: 18-24V/4A (max)
- USB-C Input: DC5V/3A, 9V/2A, 12V/3A, 15V/3A, 20V/3A
- DC Output: Cigar lighter x 2- 12V/15A
USB-C:5V/3A,9V/3A,12V/3A,15V/3A,20V/3A
USB-A 1:3.6-6.5V/3A,6.5-9V/2A,9-12V/1.5A
UAB-A 2:5V/2.4A DC Laptop output:12V/5A 16.5V/4A 20V/3.5A 20V/3.5A 24V/2A Wireless max: 10W - Wireless – 10W
- Weight 3043g
- Size – 225*165*76mm
WARNINGS
- Turn off your heated tube and humidifier. The batteries are not designed to run heating elements.
- Only use the supplied AC and DC charge cord to charge the CPAP battery kit. Using a different charge cord other than the two supplied may damage the battery bank.
- Never connect the input charge port and the round main output power port with the provided DC charge cord on the same battery bank. Doing so may damage the battery.
- Never leave the battery bank unattended for long periods while charging. When charging is complete, disconnect the battery bank charge cord from the charge source.
- For best results, use the DC power cord specific to the individual PAP machine being powered (sold separately). Do not use the AC or DC charge cords (included) to power a PAP machine or other appliance. This may damage the PAP machine, appliance, or battery bank.
- Do not charge below 32°F. The optimum ambient charge temperature is 40°F – 110°F. F. Do not charge the battery bank if the charge cord or battery bank has obvious damage or if the battery bank appears to be bulging. A bulging battery bank is a potential sign of damaged lithium cells.
- Do not charge the battery bank if it feels excessively hot. The battery bank should not reach more than 120°F while charging or discharging and should not feel hotter than a warm cup of coffee.
Power Your CPAP Machine Using Your Device’s DC Charging Cable
Most CPAP machines include a DC charging cable that makes it possible to power the CPAP machine from your car’s battery.
To connect your CPAP machine to the max , you’ll need to follow these steps:
- Choose the correct voltage for your CPAP
- Connect the DC cable to the battery and the other end to your CPAP machine. The battery should begin providing power to your CPAP automatically.
How to Charge the AirPro max
- Plug the charging cable into the charge input port and the other end into the power source.
- Charging will begin automatically.
- You can also charge from solar or 12V DC
Get the Most Out of Your AirPro Max Battery
Turn off your heated tube and humidifier.
Storing your AirPro Max Pro Battery
If fully charged, the Max battery can be stored for up to a year. However, we recommend charging and using your battery every 3 months to keep it healthy.
